View BSR62_4565225.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DISCRETE SEMICONDUCTORS
DATA SHEET
dbook, halfpage
M3D186
BSR62 PNP Darlington transistor
Product data sheet Supersedes data of 1999 Apr 26 2004 Nov 11
NXP Semiconductors
Product data sheet
PNP Darlington transistor
FEATURES * High current (max. 1 A) * Low voltage (max. 80 V) * Integrated diode and resistor. APPLICATIONS * Industrial applications such as: - Print hammer - Solenoid - Relay and lamp driving. DESCRIPTION PNP Darlington transistor in a TO-92; SOT54 plastic package. NPN complement: BSR52. Fig.1
handbook, halfpage
BSR62
PINNING PIN 1 2 3 base collector emitter DESCRIPTION
2 1
1 2 3
MAM306
3
Simplified outline (TO-92; SOT54) and symbol.
ORDERING INFORMATION PACKAGE TYPE NUMBER NAME BSR62 SC-43A DESCRIPTION plastic single-ended leaded (through hole) package; 3 leads VERSION SOT54
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCBO VCES VEBO IC ICM IB Ptot Tstg Tj Tamb Note 1. Transistor mounted on an FR4 printed-circuit board. PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current base current (DC) total power dissipation storage temperature junction temperature ambient temperature Tamb 25 C; note 1 CONDITIONS open emitter VBE = 0 V open collector - - - - - - - -65 - -65 MIN. MAX. -90 -80 -5 -1 -2 -0.2 830 +150 150 +150 V V V A A A mW C C C UNIT
2004 Nov 11
2
NXP Semiconductors
Product data sheet
PNP Darlington transistor
THERMAL CHARACTERISTICS SYMBOL Rth(j-a) Note 1. Transistor mounted on an FR4 printed-circuit board. CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL ICES IEBO hFE PARAMETER emitter-base cut-off current DC current gain CONDITIONS VEB = -4 V; IC = 0 A VCE = -10 V; see Fig.2 IC = -150 mA IC = -500 mA VCEsat VBEsat fT collector-emitter saturation voltage IC = -0.5 A; IB = -0.5 mA IC = -1 A; IB = -4 mA IC = -1 A; IB = -4 mA transition frequency VCE = -5 V; IC = -500 mA; f = 100 MHz ICon = -500 mA; IBon = -0.5 mA; IBoff = 0.5 mA 1 000 2 000 - - - - - - - - - - - 200 - - MIN. - - TYP. - - PARAMETER thermal resistance from junction to ambient CONDITIONS note 1 VALUE 150
BSR62
UNIT K/W
MAX. -50 -50
UNIT nA nA
collector-emitter cut-off current VBE = 0 V; VCE = -80 V
-1.4 -1.8 -2 -2.4 -
V V V V MHz
base-emitter saturation voltage IC = -0.5 A; IB = -0.5 mA
Switching times (between 10% and 90% levels); see Fig.3 ton toff turn-on time turn-off time - - - - 0.5 0.7 s s
2004 Nov 11
3
NXP Semiconductors
Product data sheet
PNP Darlington transistor
BSR62
handbook, full pagewidth
6000
MGD839
hFE 5000
4000
3000
2000
1000
0 -10-1
-1
-10
-102
IC (mA)
-103
VCE = -10 V.
Fig.2 DC current gain; typical values.
handbook, full pagewidth
VBB
VCC
RB (probe) oscilloscope 450 Vi R1 R2
RC Vo (probe) 450 DUT oscilloscope
MGD624
Vi = -10 V; T = 200 s; tp = 6 s; tr = tf 3 ns. R1 = 56 ; R2 = 10 k; RB = 10 k; RC = 18 . VBB = 1.8 V; VCC = -10.7 V. Oscilloscope: input impedance Zi = 50 .
Fig.3 Test circuit for switching times.
2004 Nov 11
4
NXP Semiconductors
Product data sheet
PNP Darlington transistor
PACKAGE OUTLINE
Plastic single-ended leaded (through hole) package; 3 leads
BSR62
SOT54
c
E d A L b
1
D
2
e1 e
3
b1
L1
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 5.2 5.0 b 0.48 0.40 b1 0.66 0.55 c 0.45 0.38 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1)
max.
2.5
Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 JEITA SC-43A EUROPEAN PROJECTION ISSUE DATE 04-06-28 04-11-16
2004 Nov 11
5
NXP Semiconductors
Product data sheet
PNP Darlington transistor
DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes 1. Please consult the most recently issued document before initiating or completing a design. PRODUCT STATUS(2) Development Qualification Production DEFINITION
BSR62
This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.
2004 Nov 11
6
NXP Semiconductors
Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content, except for package outline drawings which were updated to the latest version.
Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com
(c) NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands R75/05/pp7 Date of release: 2004 Nov 11 Document order number: 9397 750 13602

▲Up To Search▲

Price & Availability of BSR62

	To Download BSR62 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .